Device passport

Whirlpool Top Load HE Washer

A manufacturer-documented scope for Whirlpool top-load HE washer error codes. This is not treated as every Whirlpool washer.

HIGHINDEXABLELast verified 2026-07-21

Exact scope: Use only when the appliance is a Whirlpool top-load HE washer and the displayed code appears in the cited Product Help article.
Region: United States
Category: Washing Machines
Label location: Washer model labels are commonly located around the lid opening or rear panel. Confirm against the appliance label before using model-specific guidance.
Known variants: Keep this scope separate from Whirlpool front-load washers. Whirlpool warns that the listed article may not include every code for every exact top-load model, so exact owner manuals still outrank this family page when available.
Recall check: No Whirlpool top-load HE recall has been attached to this scope in the launch corpus. Future CPSC imports should match recalls by exact model and serial/date range before surfacing them here.

Model verification

Use only when the appliance is a Whirlpool top-load HE washer and the displayed code appears in the cited Product Help article.

Keep this scope separate from Whirlpool front-load washers. Whirlpool warns that the listed article may not include every code for every exact top-load model, so exact owner manuals still outrank this family page when available.

Manuals and documents

troubleshooting guideError Codes in Top Load HE Washersen-US; United States; revision 10; OFFICIAL_LINK_ONLY; checked 2026-07-21 troubleshooting guideF0E9 - Error Codeen-US; United States; revision not stated; OFFICIAL_LINK_ONLY; checked 2026-07-26 troubleshooting guideF0E8 - Error Codeen-US; United States; revision not stated; OFFICIAL_LINK_ONLY; checked 2026-07-26 troubleshooting guideF1E1- Error Codeen-US; United States; revision not stated; OFFICIAL_LINK_ONLY; checked 2026-07-26

Error codes

F8 E1The washer is taking too long to fill or has a water-supply problem.Whirlpool top-load HE washer support article scope.HCThe washer indicates that the hot and cold inlet hoses are installed incorrectly.Whirlpool top-load HE washer support article scope.LdLThe washer lid is not locking, usually because something may be interfering with the lid lock.Whirlpool top-load HE washer support article scope.OfbThe washer load is out of balance and the machine may be trying to correct it.Whirlpool top-load HE washer support article scope.drnThe washer is not draining properly; Whirlpool notes this can sometimes be an installation problem.Whirlpool top-load HE washer support article scope.PFThe wash cycle was interrupted by a power failure.Whirlpool top-load HE washer support article scope.SudThe washer has detected excessive suds in the basket.Whirlpool top-load HE washer support article scope.LdUThe lid cannot unlock because something may be preventing lid movement.Whirlpool top-load HE washer support article scope.lidThe washer needs the lid to be opened and closed before the cycle can continue.Whirlpool top-load HE washer support article scope.OLThe washer load is overloaded.Whirlpool top-load HE washer support article scope.LFThe washer is in the same low-fill or no-fill code group as Lo FL and F8 E1.Whirlpool top-load HE washer support article scope.Lo FLThe washer is in Whirlpool’s low-flow fill code group.Whirlpool top-load HE washer support article scope.F0E9The washer detected an unbalanced load.Whirlpool top-load washer dedicated Product Help article scope.F0E8Too much residual water was detected in the washer.Whirlpool top-load washer dedicated Product Help article scope.F1E1Whirlpool directs users to cycle power to reset the washer control.Whirlpool top-load washer dedicated Product Help article scope.

Symptoms

HIGHWhirlpool top-load HE washer will not fill or shows F8 E1The documented low-fill scope points first to water supply, hose routing and hose condition checks.HIGHWhirlpool top-load HE washer will not drain or shows drnWhirlpool documents drn as the washer not draining properly and notes that installation can sometimes be involved.HIGHWhirlpool top-load HE washer has excess suds or shows SudWhirlpool documents Sud as excessive suds in top-load HE washers and points users to HE High-Efficiency detergent use.HIGHWhirlpool top-load HE washer lid will not lock or shows LdLWhirlpool documents LdL as the lid not locking, with checks for items under the lid and detergent buildup around the lock mechanism.HIGHWhirlpool top-load HE washer load is out of balance or shows OfbWhirlpool documents Ofb as an out-of-balance load and describes load redistribution, balance correction and bulky-item guidance.HIGHWhirlpool top-load HE washer lid will not unlock or shows LdUWhirlpool documents LdU as a lid-unlock problem where objects on the lid may prevent the washer from unlocking.HIGHWhirlpool top-load HE washer does not recognize the lid stateWhirlpool lists lid as a top-load HE washer display condition, so the safe first checks focus on ordinary lid movement and visible obstruction.HIGHWhirlpool top-load HE washer shows OL or has an overloaded loadWhirlpool documents OL as an overloaded washer load, so the first safe correction is reducing the load before restarting.HIGHWhirlpool top-load HE washer shows LF or takes too long to fillWhirlpool groups LF with Lo FL and F8 E1 on top-load HE washers, so safe first checks stay focused on water supply and inlet hoses.HIGHWhirlpool top-load HE washer shows Lo FL or has low water flowWhirlpool groups Lo FL with LF and F8 E1, so first checks focus on household water supply and inlet hose condition.HIGHWhirlpool top-load washer shows F0E9 or has an unbalanced loadWhirlpool documents F0E9 as an unbalanced-load alert, so safe first checks focus on load distribution and size.HIGHWhirlpool top-load washer shows F0E8 or leaves water in the tubWhirlpool documents F0E8 as residual water remaining in the washer, with Drain and Spin as the safe first action.HIGHWhirlpool top-load washer shows F1E1Whirlpool documents F1E1 with a five-minute control power reset as the first safe step.

Maintenance

The current source is an error-code support article, not a complete owner manual. It supports safe water-supply and hose checks for F8 E1/LF/Lo FL, plus links to Whirlpool washer help, but it does not establish a full maintenance schedule for every top-load HE model.

Safety and recalls

No Whirlpool top-load HE recall has been attached to this scope in the launch corpus. Future CPSC imports should match recalls by exact model and serial/date range before surfacing them here.

Primary citations

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, LF, Lo FL or F8 E1 is documented as a long-fill or water-supply problem.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, HC is documented as hot and cold inlet hoses installed incorrectly and shown at the end of the wash cycle.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, LdL is documented as the lid not locking, with checks for load items under the lid and detergent buildup around the lid lock mechanism.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, Ofb is documented as an out-of-balance load; the article says the washer may run a load-balance correction routine, then users can redistribute the load and press START/PAUSE when stopped.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, drn is documented as the washer not draining properly, and Whirlpool notes this can sometimes be an installation problem.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, PF is documented as a wash cycle interrupted by power failure, with START held to restart or POWER pressed to clear the display.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, Sud is documented as excessive suds, with HE detergent use called out by the manufacturer.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, LdU is documented as the lid not unlocking because objects on the lid may prevent unlocking.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, lid is listed in the official top-load error-code article as a lid-related display condition within that washer scope.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, OL is documented as an overloaded washer load, with removal of several items before restarting.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, LF is listed with Lo FL and F8 E1, and Whirlpool points that group to its F8 E1 or LO FL display guidance.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

Error Codes in Top Load HE Washers

For Whirlpool top-load HE washers, Lo FL is listed with LF and F8 E1, and Whirlpool points that code group to F8 E1 or LO FL display guidance.

Source: Whirlpool Product Help (A)
Section: Top-load article table
Last checked: 2026-07-21

F0E9 - Error Code

Whirlpool documents F0E9 as an unbalanced-load code and recommends canceling or pausing, draining if water is present, and rearranging or reducing the load before restart.

Source: Whirlpool (A)
Section: F0E9 - Error Code
Last checked: 2026-07-26

F0E8 - Error Code

Whirlpool documents F0E8 as too much residual water in the tub and recommends running Drain and Spin, then service if the problem persists.

Source: Whirlpool (A)
Section: F0E8 - Error Code
Last checked: 2026-07-26

F1E1- Error Code

Whirlpool documents F1E1 with a five-minute disconnect from the power source to reset the washer control, followed by service if help is still needed.

Source: Whirlpool (A)
Section: F1E1- Error Code
Last checked: 2026-07-26