Maintenance procedures
- Check for visible water around or under the dishwasher.
- On Waterwall models, check whether the water reflector is blocked.
- Do not keep restarting the dishwasher while a leakage code is active.
Document revision
Samsung dishwasher is displaying an error code
Official Samsung support page for LC / LE in the Samsung Dishwasher error-code scope scope. Pelledor links to the source and extracts only safe first checks.
- Type
- troubleshooting guide
- Language and region
- en-US; United States
- Revision
- Not stated by source
- Date
- Not stated by source
- Redistribution
- OFFICIAL_LINK_ONLY
- Availability
- AVAILABLE; checked 2026-07-27
- Models covered
- dishwasher-error-code-scope
- MIME
- text/html
- Checksum
- Not stored; official link only
Pelledor links to the official Samsung support page and does not host a redistributed copy.
Useful sections
- LC, LE - Leakage error
Codes in this document
- LC / LE
Warnings
- Use the exact model manual and Samsung support channels when the official safe steps do not clear the code.
Other revisions
No alternate revision has been attached yet.
Source-backed notes
Samsung documents LC and LE as leakage errors where the leak sensor detects moisture; the dishwasher may run to drain water, and Waterwall models may also indicate a blocked reflector.
- Source
- Samsung Electronics America (A)
- Section
- Samsung dishwasher is displaying an error code
- Last checked
- 2026-07-27
Samsung documents dishwasher 4C and 4E as water-supply errors where the dishwasher is not getting water at the pressure or temperature it needs.
- Source
- Samsung Electronics America (A)
- Section
- Samsung dishwasher is displaying an error code
- Last checked
- 2026-07-27
GE Appliances documents FTD or F56 as failure to drain and says to check the drain hose, air gap, and disposer.
- Source
- GE Appliances (A)
- Section
- Dishwasher - Error, Fault or Function Codes
- Last checked
- 2026-07-27
GE Appliances documents PrS as an invalid pressure-sensor signal to the control, notes that the cycle cannot start or will cancel, and recommends service.
- Source
- GE Appliances (A)
- Section
- Dishwasher - Error, Fault or Function Codes
- Last checked
- 2026-07-27