Pelledor
Document revision

Dishwasher - Error, Fault or Function Codes

Official GE Appliances support page for FTD / F56 in the GE Dishwasher error-code scope scope. Pelledor links to the source and extracts only safe first checks.

Type
troubleshooting guide
Language and region
en-US; United States
Revision
Not stated by source
Date
Not stated by source
Redistribution
OFFICIAL_LINK_ONLY
Availability
AVAILABLE; checked 2026-07-27
Models covered
dishwasher-error-code-scope
MIME
text/html
Checksum
Not stored; official link only
Download from the manufacturer

Pelledor links to the official GE Appliances support page and does not host a redistributed copy.

Useful sections

Codes in this document

Maintenance procedures

  • Confirm the display reads FTD or F56.
  • Check the drain hose for visible kinks or obstruction.
  • Check the air gap if installed.
  • Check the disposer connection if the dishwasher drains through a disposer.

Warnings

  • Use the exact model manual and GE Appliances service channels when the official safe steps do not clear the code.

Other revisions

No alternate revision has been attached yet.

Source-backed notes

Samsung dishwasher is displaying an error code

Samsung documents LC and LE as leakage errors where the leak sensor detects moisture; the dishwasher may run to drain water, and Waterwall models may also indicate a blocked reflector.

Source
Samsung Electronics America (A)
Section
Samsung dishwasher is displaying an error code
Last checked
2026-07-27
Samsung dishwasher is displaying an error code

Samsung documents dishwasher 4C and 4E as water-supply errors where the dishwasher is not getting water at the pressure or temperature it needs.

Source
Samsung Electronics America (A)
Section
Samsung dishwasher is displaying an error code
Last checked
2026-07-27
Dishwasher - Error, Fault or Function Codes

GE Appliances documents FTD or F56 as failure to drain and says to check the drain hose, air gap, and disposer.

Source
GE Appliances (A)
Section
Dishwasher - Error, Fault or Function Codes
Last checked
2026-07-27
Dishwasher - Error, Fault or Function Codes

GE Appliances documents PrS as an invalid pressure-sensor signal to the control, notes that the cycle cannot start or will cancel, and recommends service.

Source
GE Appliances (A)
Section
Dishwasher - Error, Fault or Function Codes
Last checked
2026-07-27