What to do now
Check for a kinked or blocked drain hose and inspect the drain pump filter only where access is safe.
Error code
LG LG Front Loader Washer OE Error OE: Meaning, Safe Checks and Official Source
The washer was unable to drain the water. Check for a kinked or blocked drain hose and inspect the drain pump filter only where access is safe. Do not keep running the appliance if the code returns or a safety sign appears.
Applies to: LG Front Loader Washer OE support scope official LG support article scope.Confidence HIGHLast verified 2026-07-29
Applies to
- LG products covered by the cited OE Error Code - Front Loader Washer article
- Displayed OE code in that LG support scope
Region: Global. This page does not generalize the code to every LG washer.
What the code means
The washer is reporting a drain problem. LG points first to drain hose restriction and clogged drain pump filter checks before service assumptions.
Confirmed: LG documents OE on front-loader washers as a condition where the washer was unable to drain the water.
Can you keep using it?
Only after safe supply checks and only if the code clears.
When to stop
Stop if water remains, leakage appears, access is unsafe, or the drain filter cannot be opened without spilling water near electrical parts.
When to call a professional
Request LG service if OE continues after safe hose and filter checks.
Safe checks
- Confirm the display reads OE.
- Check whether the drain hose is kinked or compressed.
- Inspect the drain pump filter only if the model access procedure is safe.
- Avoid moving or opening the appliance if standing water or electrical safety is uncertain.
Confirmed by the manufacturer
- The washer was unable to drain the water.
- The drain hose may be kinked or compressed.
- The drain pump filter may be clogged.
- A frozen drain path can prevent draining in cold conditions.
Commonly associated with this fault
- A restricted hose, blocked pump filter, or frozen drain path can fit LG’s official OE explanation.
Not confirmed for this exact model
- A failed drain pump, control, wiring harness, or pressure sensor is not confirmed by OE alone.
Reset instructions
No reset procedure is published here because the current source does not document one for this scope.
Do not repeatedly restart if OE returns or water remains after accessible drain-path checks.
Information to collect before calling service
Record model label, exact OE display, water level, drain-hose routing, pump-filter condition, and whether the pump runs.