Document revision
F9E1 - Dishwasher
Official JennAir Product Help page for F9E1 in the JennAir Dishwasher F9E1 support scope scope. Pelledor links to the source and extracts only safe first checks.
- Type
- troubleshooting guide
- Language and region
- en-US; United States
- Revision
- Not stated by source
- Date
- Not stated by source
- Redistribution
- OFFICIAL_LINK_ONLY
- Availability
- AVAILABLE; checked 2026-07-30
- Models covered
- dishwasher-f9e1-support-scope
- MIME
- text/html
- Checksum
- Not stored; official link only
Download from the manufacturerPelledor links to the official JennAir Product Help page and does not host a redistributed copy.
Maintenance procedures
- Confirm the display reads F9E1.
- Check the drain hose for kinks, pinches or clogs.
- Remove and clean the filter under running water if the model allows safe access.
- If connected to a disposer, confirm the disposer is clear and the knockout plug was removed on new installations.
- If an air gap is installed, follow the air-gap maker instructions for clearing it.
Warnings
- Use the exact model manual and JennAir service channels when the official safe steps do not clear the code.
Other revisions
No alternate revision has been attached yet.
Source-backed notes
KitchenAid documents F9E1 as Long Drain - Not Draining and lists filter, drain hose, disposer and air-gap checks.
- Source
- KitchenAid (A)
- Section
- F9E1 - Dishwasher
- Last checked
- 2026-07-30
JennAir documents F9E1 as Long Drain - Not Draining and lists filter, drain hose, disposer and air-gap checks.
- Source
- JennAir (A)
- Section
- F9E1 - Dishwasher
- Last checked
- 2026-07-30